Adofilm Pvc Decorative Films Product Description

Interior / 300 micron & 350 micron

Properties Test Methods Value
Thickness (Only for plain films, not embossed) DIN EN ISO 2286-3, 1998-07 0,34 mm , ± 6 %
Colour Tolerances for Plain Films DIN 53236 (45/0), 1983-01 ∆E≤ 0,5 ∆L≤ ±0,30
∆a≤ ± 0,20 ∆b≤ ± 0,3
Color Consistency of Printed Films - Manufacture and visual assessment with original specimen
Gloss Level Tolerances
DIN 67530, 60° measuring head
- ≤ 10 ± 2 %
Tensile Strength ASTM D882 Longitudal ≥ 80 N
Transverse ≥ 60 N
(depending on embossing)
Elongation at Break ASTM D882 ≥ 3 %
(depending on embossing)
Light Fastness (QUVA) DIN EN ISO 4892-2 ≥6 ( blue scale )
Dimensional Stability 80 °C- 10 mins longitudinal max. - 7%
Embossing Stability 60 °C- 10 mins no visible changes to gloss, embossing or colour compared to the standard

* Normal climate : 23 ° C (± 1 °C), 50 % of relative atmospheric humudity.

* This techical information sheet represents our latest state of knowledge and shall inform without obligation

* Store in a dry clean environment at room temperature with moderate humidity.The material can be suspended in unopened packaging. Store away from sources of heat and sunlight

* Material should be acclimatised 72 hours prior to use at room temperature ( about 20 ° C)

* When the above conditions are met , it is recommended that primer applied products should be used within 24 months.

** Width : 143 cm | 1 Roll : 100 lm = 143 SQM2 | 1 Pallette : 16 ROLL = 2.288 SQM


Interior / 200 micron

Properties Methods Value
Thickness
( Only for plain films, not embossed )
DIN EN ISO 2286-3, 1988-07 0,2mm, ±6%
Colour Tolerances for Plain Films DIN 53236 (45/0), 1983-01 ∆E≤ 0,5 ∆L≤ ±0,30 ∆a≤ ± 0,20 ∆b≤ ± 0,3
Color Consistency of Printed Films - Manufacture and visual assessment with original specimen
Gloss Level Tolerances
DIN 67530, 60° measuring head,
- ≤ 15 ± 2 %
Tensile Strength ASTM D882 Longitudal ≥ 30
NTransverse ≥ 40 N
(depending on embossing)
Elongation at Break ASTM D882 >3%
(depending on embossing)
Light Fastness (QUVA) DIN EN ISO 4892-2 ≥6(blue scale)
Dimensional Stability 80 °C- 10 mins longitudinal max. - 6%
Embossing Stability 80 °C- 10 mins no visible changes to gloss, embossing or colour compared to the standard

* Normal climate : 23 ° C (± 1 °C), 50 % of relative atmospheric humudity.

* This techical information sheet represents our latest state of knowledge and shall inform without obligation

* Store in a dry clean environment at room temperature with moderate humidity.The material can be suspended in unopened packaging. Store away from sources of heat and sunlight

* Material should be acclimatised 72 hours prior to use at room temperature ( about 20 ° C)

* When the above conditions are met , it is recommended that primer applied products should be used within 24 months.

** Width : 143 cm | 1 Roll : 250 lm = 357,5 SQM | 1 Pallette : 12 ROLL = 4.290 SQM





Interior / High Gloss

Properties Value Unit Methods
Color Tolerance ∆L*: ± 0,4 ; ∆a*: ±0,3 ; ∆b*: ±0,4 ∆E*: ≤ 0,7 ∆E* X-Rite Ci6x , Ci7 (D65 / 10 ° , CIELAB)
Thickness 0,31 mm DIN EN ISO 2286-3
DIN 53370
Density 1,5 g/cm3 -
Tensile Strength Longitudinal : ≥ 45
Transversal : ≥ 40
Mpa ISO 527-3 : 2016 ; ASTM D 638-02a
Elongation at Break Longitudinal : ≥ 20
Transversal : ≥ 25
% ISO 527-3 : 2016 ; ASTM D 638-02a
Scratch Resistance ≤ 0,4 N TS EN 15186 DIN EN ISO 68861-4
Dimensional stability Longitudinal : max. - 2
Transversal :max. – 1,6
% DIN 5377 ( 100 ° C / 10 min )
Gloss Level ≥ 90 ( 20 ° ) GU Rhopoint 60 ° Gloss Meter
Light Fastness ≤ 0,6 ( Xenon: 200 hr) ∆E* DIN EN ISO 4892-2 / 105 B 02
TS EN 15187
Scratch Resistance (Pencil Hardness) HB ↑ - TS EN ISO 15184
Dyne pen test 36 mN/m ASTM D 2578
Adhesion Test (Cross Cut) 5B
Value "0" (No Separate)
- ASTM D 3359-17

* This technical information sheet represents our latest state of knowledge and shall inform without obligation.






Adofilm pallet size & dimensions

Product Code Roll Dimension (mm) Thickness (micron) Pallet Drawing Roll Width (mm) Pallette Dimension (cm) Rolls in pallete Total Meter (mt) Pallete Total Weight (kg)
SN-MT 250 200 1430 100X110 12 3000 1008,2
ST 250 200 1430 100X110 9 2250 682,685
SA 250 200 1430 100X110 12 3000 903,62
SN-MT-BS 100 350 1430 100X110 16 1600 1053,27
AS 500 160 12400 100X110 9 4500 1085,28
ST(DIŞ MEKAN) 500 200 680 80X110 6 3000 454,26